Ultrasonic Thickness Gauges

The new TI-25 Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!
The TI-25 can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.
The TI-25 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.

Features

• Wall thickness on hard materials including corrosion of tank walls, piping and hull plates
• Inspection of metals including steel, cast iron (malleable, and spheroidal graphite), aluminium, copper, brass, titanium, sheet metal, storage tanks, ships, structures and piping systems.
• Inspection of non-metals including glass, ceramics and hard plastics (except acrylic resin)
• Direct readout of thickness inches or mm
• Automatic subtraction of coating thickness mode (Echo to Echo mode) (MMX models)
• Built in test plate
• Calibrate for a wide range of rigid materials
• Scan mode for surveying large areas
• Data Logging option
• Special probes for high temperature
• Acoustic velocity table for common materials included

Ultrasonic thickness gauges use sound wave to measure wall thickness. Different types of materials have different inherent acoustic velocities. ( sound travels at different speeds through different materials ).For example the acoustic velocity of steel is 0.2330 inches/microsecond and that of aluminum is 0.2500 inches/microsecond. The TI 25 can be set to any acoustic velocity depending on the material being measured. The instruction book includes a table of acoustic velocities for common materials. Even if you don't know the acoustic velocity or your material you can measure it with the TI25 provided you have a sample of material of known thickness to start with. Picture to the right shows a NIST certified calibration stepped block

The TI-25DL  incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is included.
In addition to single and scan modes the TI-25DL also has a Differential mode which displays the difference ("+" or "-") from a set "nominal" value.

Standard Kit TI-25 $1495.00
With Data Logger   $1795.00