No items found.
Conductivity
2 or 4-Pole Conductivity Transmitter
The GLMU200MP and GLMU400MP are compact transmitter for two or four pole conductivity cells that features a small LCD display and analog output.
- 3 conductivity range options
- Current or voltage outputs that are freely scalable
- Adjustable cell constants
- Integrated temperature compensation
- Pre-adjusted measuring cell included.
GLMU 200 MP: cost optimized 2 pole cell, suitable e.g. for pure water / drinking water / sweat water
GLMU 400 MP: 4 pole cell, especially suitable for applications above 2000 µS/cm e.g. sewage water, sea water etc.
In order to quote select: 2 or 4 pole Version + Desired Probe + Cable Length + Output Signal
Request A Quote
Ask A Question
Key Specifications
GLMU200MP Measuring Cell | Intended Use
LFE-202 & LFE-230 | fresh water 0.1 ... 2000 μS/cm, LFE-210 | Organic substances 0.1 ... 1000 μS/cm, LFE240 & LFE 220 | Ultrapure water 0.01 ... 200 μS/cm
GLMU400MP Measuring Cell | Intended Use
LFE-400 & LFE-430 | dirty & salt water 0.1 μS/cm ... 500 mS/cm
Conductivity Cell Cable Length
1, 2, 3, 4, 5, or 6m
Output Signal
4...20mA (2 wire) | 0...10V (3 wire) | 0...1V (3 wire)
Units
uS/cm, mS/cm, Ohm*cm, g/l, Salinity %, g/kg
Cell Constant
Programmable 0.300 to 1.200
Measuring Function
Conductivity, Resistivity, TDS total dissolved solids, Salinity
Temperature Compensation
Selectable: on/off, non-linear for fresh water according to EN 27888 (DIN 38404), Linear (all other aqueous solutions)
Accuracy (at nominal temp 25C), Conductivity | Temperature
Conductivity: ±0,5% of measured value ±0,3 FS (-RW: ±1% of m. value ±0,3 FS | Temperature: ±0.1°C of measured value ±1 Digit
Supply Voltage
Dependent on analog output. 4-20mA & 0-1V = 12-30VDC | 0-10V = 18-30VDC
Available Accessories
Available Accessories
Request A Quote
Ask A Question
Calibration and service is available for this item.
Click here to request an RMA