Electrophoresis
Power Supplies 200-6000 V, 20 - 300 W, 20 - 2000mA |
|
![]() |
Techniques
|
11
models to choose from This range of high voltage power supplies from Consort meets all modern requirements for electrophoresis. There are ten models to choose from, all with the same great features, quality engineering, and attractive pricing. |
Manual Operation In Manual mode you set the voltage, current and time, and you can change these parameters during the run. |
Programmable
step function Up to 9 different sets of frequently used parameters can be stored in the non-volatile memory for future recall. Simply select the corresponding program number and press RUN. Each program has 9 steps, providing a flexible multiple step function for special techniques. |
Voltage Ramp A linear voltage ramp can be programmed for any step provided the limiting power or current is not reached. |
Timer &
volt-hour integrator Timer or volt-hour controlled operation is a useful standard feature on all models. The microcomputer will automatically terminate the run and sound an alarm when the count down of the selected value is achieved, or go on with an other set of parameters, when the running program recalls the next one. |
Automatic
recovery after power failure Possible drop outs of the line power have no influence as the instrument will automatically continue the run for the remaining time or volt-hours. |
Separate
displays for voltage and other parameters Reads voltage in 1 V steps. Reads current in 0.1 or 1 mA steps. Reads power in 0.1 or 1 W steps. |
Buffer Depletion
Detection Constant monitoring of running parameters terminates the run in the event of abnormal changes. |
Automatic
cross-over Stores up to 3600 output values.- voltage, current, and power, time or volthours. |
Data Logging Each model has constant voltage, constant current and constant power capabilities with automatic cross-over. Special limit controls indicate which parameter is kept constant. |
Remote Control Remote control from a PC via RS232 commands |
User
protection The user is protected from potential shock hazard since the AC line is automatically disconnected from the high voltage transformer when a ground leakage path is detected. The instrument is fully protected against any overload condition including accidental short circuit of the output. The high voltage cannot suddenly appear at the outputs. It will always increase smoothly until one of the pre-set limits is reached. |
Model | Click on model number for more specifications |
Specification All units have four outputs |
Price $US | ![]() |
|
(replaces
EV 245 E831) |
Suitable for small tanks and applications, includes data logging and real time clock enabling inspection of previous runs |
|
$950.00 | ||
EV2310 |
excellent choice for blotting, mulitple horizontal and vertical gels |
|
$950.00 | ||
EV2650 (replaces E865) |
most popular all round power supply suitable for most application |
|
$950.00 | ||
EV2230 (replaces E832) |
for High Voltage high current applications |
|
$1299.00 | ||
EV2320 (replaces E832) |
for High Voltage applications |
|
$1399.00 | ||
EV3020 (replaces EV202 & E802) |
good choice for blotting and multiple horizontal and vertical gels |
|
$1399.00 | ||
EV3610 |
Popular all round power supply |
|
$1399.00 | ||
EV3150 (replacesEV215 & E815) |
higher voltage high current application |
|
$1399.00 | ||
EV3330 |
Very high voltage small form factor suitable for most high voltage applications |
|
$1755.00 | ||
EV3620 (replaces EV262 & E862) |
Very high voltage small form factor suitable for most high voltage applications |
|
$1755.00 |
| Home | E-mail
| Inquiry form | Related
|
Horizontal Gel |
Vertical Gel |
Blotting |
| Gel Dryer | PCR
sterilization Cabinet |
Topac Inc. 231 CJC Highway, Cohasset MA 02025 USA
Tel: 781 740 8778 Fax: 781 740 8779 e-mail: sales@topac.com
HTML source and page design Copyright ©2000 - 2020 by Topac Inc. - ALL RIGHTS RESERVED