Digital Push/Pull Force Gauge 0.1% Accuracy

Digital push pull force gauges measure the tension or compression applied to the probe. Suitable for a wide range of applications.

Features of the AFG Push Pull Force Gauge
  • Direct reading tension (+) and compression (-)
  • High accuracy 0.1% full scale
  • Wide selection of gages with ranges from 250 g to 250 kg (9oz to 555 lbs)
  • Pass Fail alarms and Peak hold function
  • Complete with hook, probes and other adaptor tips
  • Readout in Kilograms force, Newtons or Pounds
  • Built in memory (500 readings), analog and digital outputs
  • Bi directional RS232 serial interface
  • Portable works with NiCd battery, built in memory backup
  • Over load warning with trend bar
  • Test stands for most applications
  • Store up to 500 readings in local memory
  • Customize the display to read up or down depending on the orientation of the unit
The Mecmesin AGF series push pull force gauges use a precision force transducer to measure the compressive and tensile forces applied to the force probe. The unit displays real time force data on the LCD screen in any of the common force units - lbs kgf or N. The display can be orientated in to suit the orientation of the unit. The instruments includes a bidirectional data link and mitutoyu compatible data output. High and low limit values can be set up for quality control and inspection operators.
Inspection and testing of all kinds of precision parts and mechanisms including relay contacts, and switches
Strength testing for components and assemblies such as wire harness
Connection testing measure the pull out and insertion force of all kinds of connectors and fitted components.
Test Stands
A range of motorized test stands permit more accurate and repeatable measurements.
General Specifications A series gauges AFG
Model Series AFG Series
Units of measure mN, N, kN, gf, kgf, ozf, lbf
Accuracy 0.1 % full scale
Sampling rate 5000 times/sec
Load cell stud thread (for attaching accessories) 10/32 UNF (5/16UNC for 1000N and 2500N)
Display LCD
Digital output RS232 / USB
Environmental temperature 10 - 30 degs C
Power NiMH batteries
Battery operation 10 hrs continuous
Weight 500 gm
Auto power off selectable 1 - 20 mins
Load range( see tables below ) See table below
Test Stands ready to use with these gauges
Vertical or Horizontal Manual
Vertical Motorized
Ordering Information AFG High Accuracy Force Gauges
Model N lb Kg Price 
US Dollars
AFG-2.5 2.5 0.55 - $1300.00
AFG-5 5 1.1 0.5
AFG-10 10 2.2 1.0
AFG-25 25 5.5 2.5
AFG-50 50 11 5.0
AFG-100 100 22 10
AFG-250 250 55 25
AFG-500 500 110 50
AFG-1000 1000 220 100
AFG-2500 2500 550 250
MDD Manual Test Stand Vertical 1000 220 100 $950.00  
MDD Manual Test Stand Horizontal 1000 220 100 $1250.00  
Electronic height Scale for MDD       $900.00  
LCP 500 N Manual Test Stand 500 110 50 $1195.00  
Electronic height Scale for LCP       $700.00  

| Home | E-mail | Inquiry form | Manual Force Gage| Torque gage | Related |

Topac Inc 231 CJC Highway, Cohasset MA 02025 USA
Tel: 781 740 8778 Fax: 781 740 8779 e-mail:

HTML source and page design Copyright ©2000 - 2015 by Topac Inc. - ALL RIGHTS RESERVED