Digital Panel Meters DC Voltage / Current /Serial Out

Digital panel meters from Asahi Keiki offer impressive specifications, reliablility  and low cost for a variety of applications

AP502	Features Thin Case 32mm depth Standard 3.5 digit Low Cost Bright 14.2 mm red LED DC 5V,Isolated Power Supply 200mV - 200V, 200uA -2A measurement Serial data output

Specifications

Input Configuration	Single Ended
Input Bias Current	50PA
Conversion Rate	2.5 /sec
Normal mode rejection	TYP 40dB (50/60Hz)
Zero Stability	Automatic Zero Adjustment
Display	LED 14.2mm 3 1/2 digit
Polarity	"-" automatic
Decimal point	Set to any position
Overrange indication	1999 flashing
Power Supply	DC 5V+/- 5% 120 mA max
Operation temperature	0~ 50 C, 35 - 85% RH
Power Consumption	600 mW
Dimension mm H x W x D	48 x 96 x 32 mm DIN size
Weight	Approx 60 gm
Dielectric Strength	input (lo) terminal to ground DC500 V. Power supply teminal to input terminal, gound, common and case AC 1500 Volts for 1 min.
Insulation Resistance	DC 500V 100 MOhm at above terminals

 

DC Voltage Measurement

Model	Range	Maximum Resolution	Input Impedance	Input Protection
AP-502-11	+/-199.9 mV	100 uV	100 MOhm	+/- 250 V
AP-502-12	+/-1.999 V	1 mV	100 MOhm	+/- 250 V
AP-502-13	+/-19.99 V	10 mV	10 MOhm	+/- 250 V
AP-502-14	+/-199.99 V	100 mV	10 MOhm	+/- 500 V

 

DC Current Measurement

Model	Range	Maximum Resolution	Input Impedance	Input Protection
AP-502-21	+/-199.9 uA	100 nA	1 KOhm	+/- 10 mA
AP-502-22	+/-1.999 mA	1 uA	100 Ohm	+/- 50 mA
AP-502-23	+/-19.99 mA	10 uA	10 Ohm	+/- 150 mA
AP-502-24	+/-199.99 mA	100 uA	1 Ohm	+/- 500 mA
AP-502-25	+/-1.999 A	1 mA	0.1 Ohm	+/-3 A

Ordering Information

AP-502-xx

Use the part numbers above for the appropriate range.

$120.00

 

Topac Inc. 231 CJC Highway, Suite 103 Cohasset MA 02025 USA
Tel: 781 740 8778 Fax: 781 740 8779
e-mail: sales@topac.com

| Home | E-mail | Online store | Inquiry form | Related |

This is a world wide web document page design layout and HTML code copyright ©2014 by Topac Inc. - ALL RIGHTS RESERVED