Digital Panel Meters - modular voltage current AC DC with analog and digital outputs, RS232, RS485 or analogue

Process Gemstones

Automotive Brix Clinical

Overview Buy Sieves online

Overview Calibrators Loggers Meters Meters-Panel Mount Probes

Dissolved Oxygen Chlorine Turbidity

Oxygen monitors Purge Baffles Electrode Grinders

Digital Panel Meters
Input Voltage/Current/Process
BCD output

Digital panel meters from Asahi Keiki
offer impressive specifications, reliability
and low cost for a variety of applications


A9000	Features BCD Output External Control DC, Voltage or current modules Universal power supply 100-240VAC or 5-12/ 12-24 V DC Max Display 19999 PDF A9000.pdf

The A9000 is a modular panel meter system with a selection of input and output cards to suit your application. Choose from input modules for, DC, Voltage and current.. Select from 2 different output options:none, BCD TTL or BCD open collector. (see order details at the bottom of this page)

A9000 Common Specifications

Specifications
Input Circuit	Single Ended Type
Sampling Speed	Max 25 times per second
Over range warning	For an input signal exceeding the display range, displays O.L.or O.L..
Display	red 7 segment LED
Display range	-19999 to 19999
Max display	19999
Zero display	leading zero suppress
Built in EEPROM
Number of rewriting	1,000,000 times/min
Operating temp and humidity range	0-50ºC 35-85%RH
Dimensions mm	96 x 48 x 75mm, 160g(TYP)(AC) 150g (TYP)(DC)
Storage temp and humidity range	-10 to 70ºC not less than 60% RH
Dielectric Strength	:AC1500V for 1minute between the power terminals and each of the input, BCD outputs and the external control (AC power). DC500V for 1minute between the power terminals and each of the input, BCD outputs and the external control (DC power). DC500V for 1minute between the input and each of BCD outputs and the external control. AC1500V for 1minute between the casing and each terminal..
Insulation resistance	built-in rewriting EEPROM in the case of digital zero

INPUT MODULES

*Base prices include input module, and single display. These are ready to use meters powered by AC voltage. To add output options or change the power supply, choose from options below or follow the links to the store configurator*

DC Voltage Measurement

Code 1	Range	Display adjustable	Input Impedance	Accuracy(23ºC ±>5ºC, 35~85% RH)	Max allowable input
11	± 199.99 mV	offset ± 19999 Full scale 0 to ± 19999	100m ohm	±(0.1% of rdg+ 2 digit)	±50V	base price no output $393.00
12	±1.9999 V		100m ohm
13	±19.99 V		approx. 1M ohm
14	±199.99 V		approx. 1M ohm		±250V
CodeE Range 15	±700.0V		100M ohm	±(0.1% of rdg+ 3 digit)	±700V

DC Current Measurement Module

Code 2	Range	Display adjustable	Input Impedance	Accuracy(23ºC ±>5ºC, 35~85% RH)	Max allowable input
22	±1.9999 mA	offset ± 19999 Full scale 0 to ± 19999	10 ohm	±(0.2% of rdg + 2 digit)	±50mA(22+23), ±3A (24+25)	base price no output $393.00
23	±19.999 mA		10 ohm
24	±199.99 mA		0.1 ohm
25	±1999.9 mA		0.1 ohm

Process Control Module

Code B	Range	Display adjustable	Accuracy	Input Impedance	Max allowable input
2A	4-20 mA	offset ± 19999 Full scale 0 to ± 19999	±(0.2% of rdg + 3digit)	10 ohm	±50mA	base price no output $393.00
1V	±1-5V		±(0.1% of rdg + 3digit)	1M ohm	±50V
3V	0-±10V		±(0.1% of rdg + 3digit)	1M ohm	±50V

Power:
AC Current	Power supply voltage range: AC100 -240V ± 10%	Consuming VA: 4.5 VA
DC Power Supply	Power supply voltage range: DC5-5%- 12V±10%	Power consumption 1.5W
DC Power Supply	Power supply voltage range: DC12-24V±10%	Power consumption 1.5W

Output Modules

External Control

Start/Hold :"Hold terminal or COM terminal" short, or hold "ON" with the "0" level
D. ZERO : Shorted between COM terminal and D.ZERO terminal --> ON
Peak.HOLD : Shorted between COM terminal and P. HOLD terminal --> ON
R.RE (relay reset) : Shorted between COM terminal and R.RE terminal --> ON
P.SEL1 to 3 : as below

Attention: "0" level: 0-1.5V apply to COM, "1" level: 3.5-5V apply to COM

BCD Output(TTL) (+$70)
Measurement data	tri-state parallel BCD
Polarity signal	1 level for negative indication
"Over" signal	1 level for overrange indication
Printing command signal	Positive pulse output after the completion of measurement
Output Logic	Switchable (PC logic not switchable)
Output signal	TTL level fan-out = 2, CMOS compatible
(Open Collector)	(+$70)
Measurement data	Negative logic transistor "ON" when logic is 1
Polarity signal	Transistor "ON" for negative indication
"Overrange signal	Transistor "ON" for overrange indication
Printing Command Signal	Transistor ON after the completion of measurement
Transistor output capacity	Applied voltage: 30V max Current: 10mA max Saturated output voltage, less than 1.2V at 10mA
Enable Function	By connecting the ENABLE terminal to COM terminal or bringing the potential of the ENABLE terminal to”0” level, BCD outputs become High impedance (TTL output) / transistors turn off (Open collector output) * “0” level : 0 to 1.5V with respect to COM terminal

Ordering Information

A9000-X1-A-0Z	Construct the part numbers by adding the numbers below. The base prices given above include the input board for the ranges shown as well as a single display and a power supply board. A=the codes above
Affix X choose 1 or 3 or 4 supply voltage	select main board power (How the unit is going to be powered) 1=AC 100-240V (standard AC outlet ) 3=DC 5-12V 4=DC 12-24V	-
Affix A=the codes above Input type	1= DC voltage ranges 11,12,13 & 14 E= DC voltage range 15. (700V) 2= DC Current ranges 22,23,24 & 25 B= Process control inputs	-
Affix Z choose 1,2 or 3 Output configuration	Select Output Type 1 = None 2 = BCD Output (TTL) 3 = BCD Output (open collector)	1= base price 2 = +$70 3 = + $70

Topac Inc. 231 CJC Highway, Suite 103 Cohasset MA 02025 USA
Tel: 781 740 8778 Fax: 781 740 8779
e-mail: sales@topac.com