Laboratory Turbidimeter
Laboratory Turbidimeter Features of the Micro100 lab Turbidimeter
  • Completely Self-Contained - contains everything you need,  manual, and calibration standards
  • Auto Ranging 0 - 1000 NTU
    Instrument senses turbidity level of sample and automatically adjusts to the appropriate measurement.
  • RS232 output
  • Optional pour through assembly
  • Simple Calibration Procedures - calibration initiated with the push of a button ensures accurate readings.
  • EPA and ISO compliance.
  • Made in the USA
 
Introduction to the Micro100 Laboratory turbidimeter
Water clarity is an important determinant of the its condition and productivity. Turbidity is a measure of water clarity. Nephelometers measure the intensity of light scattered by contaminants such as suspended and colloidal matter like clay and silt, and microscopic organisms. Turbidimeters using the nephelometric principal compare the light scattered due to contamination with the light scattering from a standard reference suspension. The result is a measurement of turbidity in NTUs - Nephelometric Turbidity Units.

The Micro100 is a bench top laboratory turbidimeter available with either white light source for USEPA 180.1 compliance or IR laser diode source for IS07027 compliance. The turbidimeter features fast response time and high accuracy in the range 0 - 1000NTU.  Other features include auto-ranging which automatically adjust the sensitivity to suit the sample and auto-calibration, a feature which prompts the operator when a calibration is needed. The Micro100 can be interfaced with a computer or serial printer using RS232 so that time, date, and NTU values can be stored and printed. The Turbidimeter is supplied ready to use with a set of calibration standards and cuvettes.

An optional pour through accessory facilitates the pouring of grab samples through the measurement chamber and out the drain.

 
Specification - Laboratory Turbidimeter Nephelometer
Conformance: ISO 7027(IR source) EPA 180.1 (tungsten lamp)
Measurement Range: Auto-Ranging from 0 - 1000 NTU 
Principle Nephelometric non ratio
Certification UL CSA CE
Accuracy +/- 2% of reading plus 0.01 NTU
Resolution

0.01 NTU (0 - 9.9 NTU)
0.1 NTU (10- 99 NTU)
1 NTU (100 - 1000NTU)

Response Time:  <6 seconds
Display: LCD
Light Source:  Tungsten filament or IR - LED (860nm)
Power Supply: 120 - 240 Volts AC
Sample Cells:  30 ml
Shipping Dimensions  27.3x25.4x9.5cm (10.7" X 10" X 3.75") 
Shipping Weight 1.92 kg (2.9lbs)
 
Ordering Information   
Model Micro100WL
White light turbidimeter for EPA180.1 compliance - 0-1000 NTU, includes set of calibration standards, 0.02, 10 & 1000 NTU 2 cuvettes with caps batteries, and instructions 110 Volt AC adaptor
$1250.00
Model Micro100IR
IR turbidimeter for ISO7027 compliance - 0-1000 NTU, includes set of calibration standards, 0.02, 10 & 1000 NTU 2 cuvettes with caps batteries, and instructions universal 100/240 Volt AC adaptor
$1390.00
Accessories  
19889 Flow through assembly $350.00
19975 Pour through assembly $375.00
19981 Cuvette stand for storing empty cuvettes and standards hold 11 $320.00
Spare Parts  
39957 Calibration Kit .02,10,1000 NTU  $210.00
19859 Rechargable Battery Pack with 120v charger $79.00
50052 Cuvettes 28 x 70 mm with light shie1d caps, (pack of 10)  $185.00
50051 Cuvettes 28 x 70 mm with light shie1d caps, (pack of 3)  $69.00

 | Email | HomeRelated |onlineturbidimeter |

 |Topac Inc. 231 CJC Highway, Suite 103 Cohasset MA 02025 USA
Tel: 781 740 8778 Fax: 781 740 8779

This is a world wide web document copyright ©2014 -by Topac Inc. - ALL RIGHTS RESERVED