Vertical Gel Electrophoresis Modular System | |||
|
The new Scie-Plas Modular vertical systems are designed to provide a complete solution to vertical gel electrophoresis in the lab. The modular systems comprise three separate modules:-
All the modules utilize the excellent quality and resolution of the successful CDC series of Vertical slab gel units. The 2-D Capillary gel and electroblotting modules simply slot into the CDC gel tanks saving on space and expense. When the module is purchased complete, everything needed for 2-D capillary gel electrophoresis and electro blotting is included except reagents. |
||
The 2-D capillary gel and electroblotting modules can be purchased as stand-alone units with their own gel tank and lid or as individual modules for use in a previously purchased CDC gel tank.
A complete 2-D electrophoresis system can also be purchased if the electroblotting module is not required. This contains everything needed for 2-D electrophoresis except reagents. With the Modules available, 2 slab gels, 10 capillary gels or two gels for electroblotting can be run at any one time. The modular and 2-D systems are available in two sizes 10 x 10 cm and 20 x 20 cm to based on the Twin Vertical Vertical gel electrophoresis systems. For Complete 2D Isoelectric focusing tube gel systems follow this link |
|||
Electroblotting module | |||
![]() |
The Compact Electro-blotting Module, which performs western and other types of blotting, is designed for ease of use and efficiency of transfer. The electrodes are only 6cm apart. This greatly increases the current strength across the blotting area and also reduces the amount of heat generated. Heat is dissipated by the large buffer volume and the bottom cooling block of the main buffer tank. The heat dissipation and electrode spacing characteristics of this module allow rapid transfers of up to two gels in as little as 1 hour. | ||
Capillary Module | |||
![]() |
The Scie-Plas Capillary Gel Module which performs the first phase of 2-D electrophoresis (Isoelectric Focusing - IEF), allows 10 capillary gels to be run at any one time, using either the 10 x 10cm or 20 x 20cm TV systems. Essentially these gels differ in the length of the capillary tubes, which are 80 or 170 mm long, allowing a high degree of versatility in the separation desired. The Scie-Plas capillary tubes have a wide capillary bore diameter, which greatly eases the extraction of the capillary gel once the IEF phase is completed. After focusing, which typically takes between 3 to 4 hours, the tube gel can then be extracted and the samples separated on a slab gel for the 2-D, size determining phase. The second separation can take as little as 1 hour to complete and therefore a complete 2-D separation can take as little as 4 hours. |
Ordering Information Mini (10x10 cm)TV Modular Systems |
TV100YK-MODSYS | Complete Modular
Mini TV Vertical system includes 10 x10 cm compact dual cooled unit, casting base, capillary module, electroblotting module and accessories |
$1599.00 |
Other 10x10 Configurations | ||
TV100YK-EBSYS | Mini compact electro blotting
unit includes 10 cm running tank and lid, Internal blotting module for 2 cassettes 2 compression cassettes and fiber pads |
$1220.00 |
TV100YK-2DSYS | Mini capillary 2D electrophoresis
unit includes 10 cm running tank and lid, capillary gel module and glass capillaries |
$1245.00 |
Modular Components 10 cm | ||
TV100-EBGRM | Mini (10 cm) blotting module, two cassettes and fiber pads only | $630.00 |
TV100-CAPGRM | Mini Capillary module only (no tank) | $560.00 |
Ordering Information Maxi (20x20 cm) TV Modular Systems |
TV400YK-MODSYS | Complete Modular CDC Vertical
system includes 20 cm compact dual cooled unit, casting base, capillary module, electro-blotting module and accessories |
$2100.00 |
Other 20 x 20 cm Configurations | ||
TV400YK-EBSYS | Maxi compact Electro Blotting
Unit includes 20 cm running tank and lid, Internal blotting module for 2 cassettes 2 compression cassettes and fiber pads |
$1699.00 |
TV400YK-2DSYS | Maxi 2D Capillary Electrophoresis
Unit includes 20 cm running tank and lid, Internal running module for 10 tube gels, 10 x 1 mm internal diameter, capillary tubes and 10 blanking ports |
$1750.00 |
Modular Components 20 x 20 cm | ||
TV400-EBGRM | Maxi (20cm) blotting module, two cassettes and fiber pads only | $725.00 |
TV400-CAPGRM | Maxi 2D Capillary module only (no tank) | $795.00 |
Modular Components (20 cm tank longer tubes) Capillary |
Complete 2D Isoelectric focusing tube gel systems here |
|
Home | E-mail |
Related | Inquiry form |
| Power
Supplies | Horizontal Gel |
DNA | Blotting
|
Topac Inc. 231 CJC Highway, Cohasset MA 02025 USA
Tel: 781 740 8778 Fax: 781 740 8779 e-mail:
sales@topac.com
HTML source and page design Copyright ©2000 - 2001 by Topac Inc. - ALL RIGHTS RESERVED