Conductivity Transducer - Analog Output

  • Conductivity Transducer
  • Scalable Analog output
  • 2 or 4 pole conductivity electrodes
  • Wide range of conductivity ranges
  • Analog output 4-20mA, 0-10V
  • Integrated temperature compensation
  • Choice of cells
  • pdf data sheet

 


Conductivity salinity, TDS transducer works over a wide range of conductivity depending on the model and type of cell used. Works with 2 and 4 pole conductivity electrodes. Ideal for for drinking water, sea water, process water, wastewater organics. Standard analog ouput scalable to read in TDS Salinity and resistivity.

Specifications

Model 400MP (4 pole) 200MP (2 pole) 200MP-RW
Measuring Range      
   Conductivity 0.0 ... 200.0 μS / cm
0 ... 2000 μS / cm
0.00 ... 20.00 mS / cm
0.0 ... 200.0 mS / cm
0 ... 500 mS / cm
0.0 ... 200.0 μS / cm
0 ... 2000 μS / cm
0.00 ... 20.00 mS / cm
0.0 ... 200.0 mS / cm
0.0 ... 200.0 μS / cm
0.00 ...20.00 μS / cm
    Specific Resistance 0.0 ... 200.0 kOhm*cm
0.00 ... 20.00 kOhm*cm
1 ... 5000 Ohm*cm
1.0 ... 500.0 Ohm*cm
1.00 ... 50.00 Ohm*cm
5.0 ... 100.0 kOhm*cm
0.50 ... 10.00 kOhm*cm
50 ... 1000 Ohm*cm
5.0 ... 100.0 Oh0.0 ... 200.0 mg / l 0 ... 2000 mg / lm*cm
0 ... 200 kOhm*cm
0 ... 2000 kOhm*cm
    TDS 0.0 ... 200.0 mg / l
0 ... 500.0 mg / l
0 ... 2000 mg / l
0.0 ... 20.0 g/l
0 ... 200 g/l
0.0 ... 200.0 mg/l
0 ... 2000 mg/l
0.0 ... 200.0 mg/l
0.00 ... 20.00 mg/l
    Salinity 0- 70 (PSU) 0-70 (PSU)  
Temperature
Compensation
5.0 ... +140.0 ° C (device)    
Measuring Cell 4 pole 2 pole 2 pole
Standard Cell c onductivity measuring cell with integrated temperature sensor. Cell constant determined from the factory and preset.
Accuracy      
    Conductivity 0.5 % of reading ± 0.3 % FS (-RW: ±1 % v. MW ±0.3 % FS)
    Temperature ±0.2 °C ±1 digit
Cell Constant K = 0.30 ... 1.20, adjustable (-RW: 0.03 ... 0.12)
Display 10 mm 4 digit LCD  
Output Signal 4 ... 20 mA (2-wire - standard), 0 ... 10 V (3-wire - option)
Power Supply 12-30V DC (not included)  
Housing ABS (IP65 - with the exception of sensor plug)
Dimensions 82 x 80 x 55 mm (without elbow-type plug and sensor plug)

Ordering Information

Configurations, meter plus one of probes below.
Prices include, meter, probe and cable
Cell Constant Temp Diameter Material Part No ~Price  

For fresh water

    Transmitter with 2 pole measuring cell graphite electrode 1 -5 to+80°C 12mm Graphite 200MP-TR $685.00
    Transmitter with 2 pole measuring cell graphite electrode PG thread 1 0 to+60 °C   Graphite 200MP-TRGP $715.00
    Transmitterwith 2 pole measuring cell graphite electrode with screw in probe 0.9 -5 to+80°C 16mm Graphite 200MP-TRP $770.00

For organic substances, alcohol, benzine, diesel

    Transmitter with 2 pole measuring cell 1   12mm Platinum/Glass 200MPLTG $1065.00

For High Purity Water

    For high purity Water 0.1 -5 to+80°C 12mm Stainless steel/PEEK 200MPRW $730.00
    For high purity water, field installation M12/G1/2a fitting 0.1 -10 to+100 °C 12mm Stainless
Steel /PEEK
200MPRWP $795.00

4 Pole Electrodes - use above 2000uS, ideal for applications susceptible to contamination - sea water etc

0.55 -5 to+80°C 12mm Graphite 400MPSW $890.00
with PG fitting 0.55 -5 to+80°C 12mm Graphite 400MPSWPG $930.00
0.4 0 to+60 °C 16mm Graphite 400MPSWP $895.00