C3010 High Resolution / Temperature
 / pH / mV /  Conductivity / Salinity/ TDS / Resistivity Meter
Two independent channels for all measurements!

 

Features of the C3010 Conductivity/pH meter

  • pH:
  • Multi-point (1...5) calibration for more linearity.
  • Selectable resolution from 0.001 pH to 0.1 pH
  • Automatic calibration with any of nine pre-programmed and five user specified pH buffers
  • Accepts pH electrodes with any zero point (Eo) between +/-999 mV

  • mV
  • Features mV calibration for accurate ORP measurements
  • Selectable resolution from 0.1 mV to 1 mV

  • Conductivity
  • Multi-point(1...3) calibration for more linearity
  • Extended conductivity range; to measure the full range from 0.001 µS/cm to 2000 mS/cm requires 3 electrodes: 0.1, 1 and 10 cm^-1.
  • Selectable reference temperature: 20° or 25°C.
  • Automatically selects correct range and frequency.
  • Automatic cell constant determination with any of three preprogrammed or user specified standard tables.
  • Allows to lock the initial conductivity range to avoid non-linear titration curves.
  • Accurate low conductivity measurements by eliminating the capacitive component of the electrode and its cable (avoid the use of long cables!).

  • Temperature
  • Reads temperatures with 0.1°C resolution
  • Manual or automatic temperature compensation.
  • Calibrates temperature probe for quality measurements.
  • Inputs
  • Two BNC inputs for pH, mV or conductivity
  • Two corresponding reference inputs.
  • Two corresponding temperature inputs.
  • Low voltage DC input for e.g. a mains adaptor.
  • Outputs
  • USB interface for connection to a computer.
  • RS232 interface for connection to a printer.
  • Data-logging
  • Stores up to 12000 values including temperature, time and date.
  • Allows to mix data from all ranges in the same table.
  • A powerful data acquisition software for PC is available optionally.
  • Cabinet
  • Robust dust and splash-proof cabinet.
  • An optional wall mounting kit allows to fix the meter to any wall making more space available on the desk.
  • Display
  • A large bright LCD screen with white backlight enables to view all channels simultaneously.
  • Stability indicator prompts the user when readings should be taken.
  • Hold function allows to freeze the display for convenient reading or recording.
  • The interactive LCD screen provides step by step instructions in the language of your choice (English, Dutch, French, German).
  • Real-time clock displays time and date.
  • Shows a GLP report on the LCD screen.
  • Free software
  • You can download free data acquisition software (DIS-1 version for the C30xx series only) from our website (www.consort.be).
  • Special features
  • Three year warranty.
  • No electrical interference between electrodes in the same solution.
  • Two-way communication with a printer or computer using RS232 or USB.
  • Can be programmed to continue automatically with the measurements or data-logging after a power failure.
  • Password protection prevents any unauthorised access to the instrument.
  • Optional 12 V car adaptor.
 
Introduction Consort C3010 high resolution Conductivity / pH meter
The C3010 is a desk top (wall mount optional) conductivity and pH meter covering a the extreme ranges of the conductivity from 0.001 uS/cm to 2000 mS/cm depending on the cell constant. The unit can work with cell constants between 0.05 and 15 inverse cms. To cover the full range of the meter three separate cells would be required with cell constants of 0.1, 1.0 and 10.0 Very accurate low conductivity measurements can be achieved because of the built in capacitance compensation. The temperature compensation can be switched off for absolute measurements  or referenced to 20C or 25C. The relative reading function allows you to directly measure the change in conductivity relative to some previously referenced level. 
For pH measurements there are two channels and these can be used to provide diffential pH measurement. (the difference between the readings on the two channels). The same feature can be applied to the mV readings.

Electrodes
The Meter will work with most standard two electrode conductivity cells and glass pH electrodes with BNC connectors. Some of the options are shown below.

Lab conductivity probe                                                          More conductivity cells here
0.1 cell constant conductivity cell
Conductivity probe with 3/4" NPT fitting
pH probe ( TuffTip ) with 3/4" NPT fitting
 
Specifications  C3010
High resolution Conductivity / Resistivity / pH /mV meter
Model CS C3010
mode Range Accuracy Resolution
    Conductivity 0 - 2000 mS/cm 0.5% Full Scale 0.001 uS/cm
    Resistivity 0 - 200 MOhms.cm   1 Ohm.cm
    Salinity 0 - 70 ppt   0.1 ppt
    TDS 0 - 100 mg/l   0.01 mg/l
    Temperature 0 - 100 degs C 0.3 °C 0.1 °C
    pH -2 to +16 0.1% +/- 1digit 0.001
    mV +/- 2000 0.1% +/- 1digit 0.1
Display Readings
    Conductivity Relative & Absolute
    Resistivity Relative & Absolute
    Salinity Relative
    Conductivity     Accuracy 0.5% of reading
Temp compensation auto manual or off -30 ~ +100 °C
Calibration  
    Conductivity 1 - 3 points
    Ref Temp 20 or 25 degs C
    Calibration Solutions
    (pre programmed )
1413 uS/cm
12.88 mS/cm
111.8 mS/cm
3 user spec.
    pH 1 to 5 points
   
Password protection Yes


Display Graphic LCD
Display Hold Included
Computer interface USB bi directional
output 0 - 2 volts
Data Logging 12000 measurements + temperature, date and time
Logging interval 1 - 9999 secs
Power Supply
AC line 110/220V 50/60Hz
DC line 9- 15 Volts DC
Dimensions 26 x 18 x 9 cms
Weight 1 Kg (2.2lb)
 
Ordering Information  view shopping cart
Model C3010 Meter only
(no electrodes or chemicals )
$905.00
Conductivity Kits (other combinations available on request )
Model C3010K conductivity Kit) includes meter + SK10T epoxy conductivity cell, built in PT100 and conductivity standards $1120.00  
Model C3010KL (low conductivity Kit) includes meter + SK21T C=0.1 glass conductivity cell, and conductivity standards $1125.00  
Ph Kit
Model C3010pH includes meter + epoxy pH probe, pH buffers, 4,7 and 10. 110V adaptor, software and instructions $1043.00  
Combined pH and Conductivity Kits    
Model C3010T Kit includes meter + epoxy conductivity probe K=1, Expoxy body pH probes, pH buffers 4,7 &10, and 2 conductivity standards. 110 V adaptor, and software $1260.00  
Conductivity Cells
Model CS SK21T Conductivity cell for low conductivity  2 electrode cell glass with platinum electrodes cell constant 0.1
110 x 12 mm includes Pt1000 resistance thermometer.
0.1 to uS/cm to 10 mS/cm 
$189.00  
Model SK20T 2 electrode cell glass with platinum electrodes cell constant 1
110 x 12 mm includes Pt1000 resistance thermometer
1 to uS/cm to 100 mS/cm 
$159.00  
Model SK23T 2 electrode cell glass with platinum electrodes cell constant 10
130 x 12 mm includes Pt1000 resistance thermometer
10 to uS/cm to 1000 mS/cm 
$189.00  
Accessories
A4800 Wall Mounting Kit $75.00  
A4049 12V car adaptor $25.00  
More conductivity cells here    

 

 | Email | Home | Cells | Related Products |

Topac Inc. 231 CJC Highway, Suite 103 Cohasset MA 02025 USA
Tel: 781 740 8778 Fax: 781 740 8779


This is a world wide web document copyright ©2000, 2001 by Topac Inc. - ALL RIGHTS RESERVED